OSPF on MikroTik with LABS

OSPF routing protocol is one the best (if not the best) interior routing protocol that many networks' companies use it. It has a lot of features and it is very reliable to be configured on our networks' routers as a routing protocol - that's the good side of the story.

The bad side of the story: OSPF is a COMPLEX routing protocol to understand and to configure. Many network engineers working with MikroTik products find OSPF difficult and many of them try to replace it with a simple routing protocol which doesn't requires a lot of IT knowledge such as RIP. That's the easiest way to solve the problem, but believe it that RIP will become a big issue and will cause for you a lot of problems when your network becomes bigger with many routers.

For this reason, I have planned to design this course to go fully into OSPF. During this course, I will pass through all OSPF topics & I will explain them in a very simple way then I will do a LAB on each of those topics to show you how you can configure this on MikroTik.

This course will have a total of 14 LABS based on a step-by-step to make it easy for students to understand each of the topics.

For the whole course, I will be using GNS3 emulator with the Free Mikrotik CHR license to be able to do my labs. If you are already an old students of my courses, then you may already know how to download/install GNS3 and make it work with the CHR image. With this method, you don't need to invest in buying physical MikroTik routers to follow my course.

So in brief, you have in total a 17 step-by-step LABS in addition of my theoretical lectures that you can profit from this course - all topics and LABS are on OSPF only.

If you want to understand OSPF in the easiest way possible, don't wait to purchase this course so I can share my knowledge to you.

Hope to see you in my course.