Linux device driver programming using Beaglebone Black(LDD1)

==> This should be your very first course to dive into the exciting world of "Linux device drivers" <==

In this course you will learn ,

1. Fundamentals Linux kernel module and syntax

2. Character device driver theory and code implementation

3. Platform bus, Platform device, and platform driver concepts

4. Platform driver implementation

5. Device tree from scratch

6. Accessing device tree nodes from drivers

7. Device instantiation through device tree nodes

8. Device tree properties and node syntax

9. Device tree overlays

10. Overlays testing via u-boot

11. Kernel synchronization services (Mutex, Spinlocks)

12. Linux device model and sysfs

13. Linux GPIO subsystem

14. Linux pinctrl subsystem

Hardware Requirements:

1) For some exercises involving testing of GPIOs, pinctrl, device tree nodes, overlays, you need a board.

In this course, Beaglebone Black board is being used.

2) Mini USB cable to power BBB

3) USB to UART cable for serial connection with BBB

4) Micro SD card 8/16 GB

5) SD card reader

6) 16x2 LCD and 10K potentiometer

7) Jumper wires

8)Bread board

OS Requirements

32/64 bit Ubuntu 18.04+ LTS

Learning order of FastBit Embedded Brain Academy Courses,

If you are a beginner in the field of embedded systems, then you can take our courses in the below-mentioned order.
This is just a recommendation from the instructor for beginners.

1) Microcontroller Embedded C Programming: absolute beginners(Embedded C)

2) Embedded Systems Programming on ARM Cortex-M3/M4 Processor(ARM Cortex M4 Processor specific)

3) Mastering Microcontroller with Embedded Driver Development(MCU1)

4) Mastering Microcontroller: TIMERS, PWM, CAN, RTC,LOW POWER(MCU2)

5) Mastering RTOS: Hands-on FreeRTOS and STM32Fx with Debugging(RTOS)

6) ARM Cortex M Microcontroller DMA Programming Demystified(DMA)

7) STM32Fx Microcontroller Custom Bootloader Development(Bootloader)

8) Embedded Linux Step by Step using Beaglebone Black(Linux)

9) Linux device driver programming using Beaglebone Black(LDD1)