Sample Questions
Q) You are discovering that there are differences between the configuration of EIGRP for IPv6 and EIGRP for IPv4. Which statement is true with regard to the difference?
a) A router ID is required for both versions
b) A router ID must be configured under the routing process for EIGRP for IPv4
c) AS numbers are not required in EIGRP for IPv6
d) AS numbers are not required in EIGRP for IPv4
Q) Which of the following techniques is NOT used by distance vector protocols to stop routing loops in a network?
a) Split horizon
b) Spanning Tree Protocol (STP)
c) Holddowns
d) Route poisoning
Q) You are creating a configuration to use on a switch. The configuration must enable you to remotely manage the switch. Which of the following command sets is correct? (Assume the commands are executed at the correct prompt.)
a) interface vlan 1ip address 192.168.20.244 255.255.255.240no shutdownexitip defaultgateway 192.168.20.241line vty 0 15password ciscologinexit
b) interface fastethernet 0/1ip address 192.168.20.244 255.255.255.240no shutdownexitip default-gateway 192.168.20.241line vty 0 15password ciscologinexit
c) interface vlan 1ip address 192.168.20.244 255.255.255.240no shutdownexitip route 192.168.20.241line vty 0 15loginexit
d) interface vlan 1ip address 192.168.20.244 255.255.255.240no shutdownexitip defaultgateway 192.168.20.241line con 0 15password ciscologinexit
Q) What command should you use to quickly view the HSRP state of the switch for all HSRP groups of which the switch is a member?
a) switch# show standby brief
b) switch# show ip interface brief
c) switch# show hsrp
d) switch# show standby
Q) When packets are transmitted from one host to another across a routed segment, which two addresses are changed? (Choose two.)
a) source IP address
b) source MAC address
c) destination IP address
d) destination MAC address